![]() ![]() Now you should be able to boot from the USB to install Windows 10 on your Mac or Windows machine.This command will take a while, and once it finishes, you can disconnect the mounted ISO with this command: Finally, run the following command to copy all the files from the mounted ISO to your USB drive.Ĭp -rp /Volumes/ESD-ISO/* /Volumes/WIN10/.Hdiutil mount ~/Downloads/your_windows_10_image.iso In my case, it is mounted as a volume named “ ESD-ISO“. Now, mount your Windows 10 ISO image with the command below, assuming it’s saved the Downloads folder.Next, run the following command to format your USB drive and name it “ WIN10“, where # is a placeholder for the disk identifier of your USB drive.ĭiskutil eraseDisk MS-DOS "WIN10" GPT disk#.In my example, my USB drive is mounted as “ disk2” and it’s about 32GB. You have to figure out the disk identifier of the USB drive you need to format. ![]() After connecting a USB drive to your Mac, open a Terminal window and type diskutil list to display all the disks attached to your machine.Of course, if you prefer not to use third-party software, you can still use the excellent Terminal app, which is a little bit more involved, but no additional software needs to be installed. Method 2: Create Windows 10 Bootable USB on Mac Using Terminal This process takes several minutes or longer, depending on the size of your selected ISO image.Click OK to start installing to the USB drive. Choose Type as USB Drive and select the device name of your USB drive (you probably would’ve noted it down earlier, so refer to that). ![]() After locating your Windows 10 ISO file, click on Open.Select the “ Diskimage” radio button, click “ …” to select a bootable ISO image. Next, download and launch the UNetbottin utility. ![]() Note down the device name since we will need that later. Select your USB drive from the left panel and click on Info button.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
January 2023
Categories |